I've rebooted the server after 14 months and set to get the newest available kernel - Linux version 3.2.69-81.art.x86_64 , but it hangs on this message:
"Registering the dns_resolver key type"
Any clue?
Will try rebooting on a previous version kernel now.
Adrian
Code: Select all
Linux version 3.2.69-81.art.x86_64 (mockbuild@loggerhead.atomicorp.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Wed Jul 15 23:07:24 EDT 2015
Command line: ro root=/dev/sda1 console=tty0 console=ttyS0,57600 crashkernel=auto selinux=0 panic=5 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
BIOS-e820: 00000000dfeb0000 - 00000000dfec0000 (ACPI data)
BIOS-e820: 00000000dfec0000 - 00000000dfef0000 (ACPI NVS)
BIOS-e820: 00000000dfef0000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000081f000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
No AGP bridge found
last_pfn = 0x81f000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dfeb0000
init_memory_mapping: 0000000100000000-000000081f000000
RAMDISK: 36d60000 - 37ff0000
ACPI: RSDP 00000000000fa470 00014 (v00 ACPIAM)
ACPI: RSDT 00000000dfeb0000 00044 (v01 121511 RSDT1432 20111215 MSFT 00000097)
ACPI: FACP 00000000dfeb0200 00084 (v01 121511 FACP1432 20111215 MSFT 00000097)
ACPI: DSDT 00000000dfeb0510 051C1 (v01 A91F7 A91F7004 00000004 INTL 20051117)
ACPI: FACS 00000000dfec0000 00040
ACPI: APIC 00000000dfeb0390 00138 (v01 121511 APIC1432 20111215 MSFT 00000097)
ACPI: MCFG 00000000dfeb04d0 0003C (v01 121511 OEMMCFG 20111215 MSFT 00000097)
ACPI: HPET 00000000dfeba510 00038 (v01 121511 OEMHPET 20111215 MSFT 00000097)
ACPI: IVRS 00000000dfeba550 000B8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: SRAT 00000000dfeba610 001D0 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: SLIT 00000000dfeba7e0 00030 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 00000000dfeba810 02E04 (v01 A M I POWERNOW 00000001 AMD 00000001)
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-e0000000
SRAT: Node 0 PXM 0 100000000-420000000
SRAT: Node 1 PXM 1 420000000-81f000000
NUMA: Node 0 [0,a0000) + [100000,e0000000) -> [0,e0000000)
NUMA: Node 0 [0,e0000000) + [100000000,420000000) -> [0,420000000)
Initmem setup node 0 0000000000000000-0000000420000000
NODE_DATA [000000041ffd9000 - 000000041fffffff]
Initmem setup node 1 0000000420000000-000000081f000000
NODE_DATA [000000081efd8000 - 000000081effefff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0081f000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000dfeb0
0: 0x00100000 -> 0x00420000
1: 0x00420000 -> 0x0081f000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x27] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at f0000000 (gap: f0000000:fa00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
PERCPU: Embedded 22 pages/cpu @ffff88040fc00000 s60736 r8192 d21184 u262144
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8251001
Policy zone: Normal
Kernel command line: ro root=/dev/sda1 console=tty0 console=ttyS0,57600 crashkernel=auto selinux=0 panic=5 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
Memory: 32776128k/34062336k available (4942k kernel code, 526088k absent, 760120k reserved, 73734k data, 1136k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:262400 nr_irqs:1352 16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2500.311 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.62 BogoMIPS (lpj=2500311)
pid_max: default: 32768 minimum: 501
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 20734 entries in 82 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Opteron(tm) Processor 4274 HE stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
#2
NMI watchdog enabled, takes one hw-pmu counter.
#3
NMI watchdog enabled, takes one hw-pmu counter.
#4
NMI watchdog enabled, takes one hw-pmu counter.
#5
NMI watchdog enabled, takes one hw-pmu counter.
#6
NMI watchdog enabled, takes one hw-pmu counter.
#7
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #8
NMI watchdog enabled, takes one hw-pmu counter.
#9
NMI watchdog enabled, takes one hw-pmu counter.
#10
NMI watchdog enabled, takes one hw-pmu counter.
#11
NMI watchdog enabled, takes one hw-pmu counter.
#12
NMI watchdog enabled, takes one hw-pmu counter.
#13
NMI watchdog enabled, takes one hw-pmu counter.
#14
NMI watchdog enabled, takes one hw-pmu counter.
#15 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 16 CPUs
Total of 16 processors activated (79995.73 BogoMIPS).
devtmpfs: initialized
atomic64 test passed for x86-64 platform with CX8 and with SSE
print_constraints: dummy:
RTC time: 17:46:27, date: 09/16/16
NET: Registered protocol family 16
Extended Config Space enabled on 2 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:04.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] has been reserved
system 00:0a: [io 0x0b00-0x0b0f] has been reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19008k freed
pci 0000:00:00.2: PCI INT A -> GSI 55 (level, low) -> IRQ 55
AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbeae000 - ffff8800dfeae000
software IO TLB at phys 0xdbeae000 - 0xdfeae000
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1474047987.724:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8fa800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.69-81.art.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8fac00
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.69-81.art.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
Refined TSC clocksource calibration: 2500.049 MHz.
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8f6000
Switching to clocksource tsc
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.69-81.art.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8f7000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.69-81.art.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8f8000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.69-81.art.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f9000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.69-81.art.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fb000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.69-81.art.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver yurex
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 0:261:795
rtc_cmos 00:04: setting system clock to 2016-09-16 17:46:32 UTC (1474047992)
Initializing network drop monitor service
Freeing unused kernel memory: 1136k freed
dracut: dracut-004-388.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (140): /proc/140/oom_adj is deprecated, please use /proc/140/oom_score_adj instead.
dracut: Starting plymouth daemon
Gahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe8fa400 port 0xfe8fa500 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe8fa400 port 0xfe8fa580 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe8fa400 port 0xfe8fa600 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe8fa400 port 0xfe8fa680 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe8fa400 port 0xfe8fa700 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe8fa400 port 0xfe8fa780 irq 22
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
3w-sas 0000:04:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
scsi8 : 3w-sas
3w-sas: scsi8: Found an LSI 3ware 9750-4i Controller at 0xfeb9c000, IRQ: 28.
3w-sas: scsi8: Firmware FH9X 5.12.00.013, BIOS BE9X 5.11.00.007, Phys: 8.
scsi 8:0:0:0: Direct-Access LSI 9750-4i DISK 5.12 PQ: 0 ANSI: 5
scsi 8:0:0:1: Direct-Access LSI 9750-4i DISK 5.12 PQ: 0 ANSI: 5
scsi: waiting for bus probes to complete ...
sd 8:0:0:0: [sda] 125829119 512-byte logical blocks: (64.4 GB/59.9 GiB)
sd 8:0:0:1: [sdb] 5733502977 512-byte logical blocks: (2.93 TB/2.66 TiB)
sd 8:0:0:1: [sdb] Write Protect is off
sd 8:0:0:0: [sda] Write Protect is off
sd 8:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sd 8:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 8:0:0:1: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
random: nonblocking pool is initialized
dracut: Switching root
Welcome to CentOS
Starting udev: udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
Gsd 8:0:0:0: Attached scsi generic sg0 type 0
sd 8:0:0:1: Attached scsi generic sg1 type 0
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:02:00.0: Disabling ASPM L0s L1
e1000e 0000:02:00.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 8c:89:a5:a0:e5:01
e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 1).
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
input: PC Speaker as /devices/platform/pcspkr/input/input2
[ OK ]
Setting hostname alien.3dev.biz: [ OK ]
Setting up Logical Volume Management: Failed to create directory /var/lock/lvm.
4 logical volume(s) in volume group "vg00" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
root: clean, 49924/788416 files, 742757/3148732 blocks
[/sbin/fsck.ext4 (1) -- /usr] fsck.ext4 -a /dev/mapper/vg00-usr
usr: clean, 233900/13369344 files, 1841252/53477376 blocks
[/sbin/fsck.ext4 (1) -- /var] fsck.ext4 -a /dev/mapper/vg00-var
var: clean, 3553504/98304000 files, 160625425/393216000 blocks
[/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/vg00-home
home: clean, 1604/32768000 files, 2997608/131072000 blocks
[/sbin/fsck.ext4 (1) -- /root/work] fsck.ext4 -a /dev/mapper/vg00-work
/dev/mapper/vg00-work: clean, 155431/16777216 files, 21840318/67EXT3-fs (sda1): using internal journal
108864 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: acl,usrquota
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: usrquota
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: usrquota
[ OK ]
Enabling /etc/fstab swaps: Adding 50315576k swap on /dev/sda2. Priority:-1 extents:1 across:50315576k
[ OK ]
Entering non-interactive startup
init: kexec-disable main process (12855) terminated with status 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
fuse init (API version 7.17)
Registering the dns_resolver key type
