jgreylist
jgreylist
Could you please add a rpm for jgreylist? (http://qmail.jms1.net/scripts/jgreylist.shtml)
As far as I can see it seems to be a better alternative than qgreylist. Better solution for storeing ip's, rewritten in C instead of PERL.
Thanks
As far as I can see it seems to be a better alternative than qgreylist. Better solution for storeing ip's, rewritten in C instead of PERL.
Thanks
-
- Atomicorp Staff - Site Admin
- Posts: 8355
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: earth
- Contact:
Re: jgreylist
sure, no problem. Definitely looks more impressive than qgreylist
Re: jgreylist
Thanks
Here is it with IPv6 support: (choose the one you like)
http://www.brandonturner.net/blog/2009/ ... jgreylist/
(step by step install: http://www.productionmonkeys.net/guides ... /jgreylist)
What needs to be done:
- install
- edit smtp.rules (add atleast: JGREYLIST_DIR)
- edit /var/qmail/service/smtpd/run
- maybe a cron for http://qmail.jms1.net/scripts/jgreylist-clean
I guess you could do a few updates in qgreylist.spec and voila
How long do you think it will take before it's ready for testing?
Here is it with IPv6 support: (choose the one you like)
http://www.brandonturner.net/blog/2009/ ... jgreylist/
(step by step install: http://www.productionmonkeys.net/guides ... /jgreylist)
What needs to be done:
- install
- edit smtp.rules (add atleast: JGREYLIST_DIR)
- edit /var/qmail/service/smtpd/run
- maybe a cron for http://qmail.jms1.net/scripts/jgreylist-clean
I guess you could do a few updates in qgreylist.spec and voila
How long do you think it will take before it's ready for testing?
-
- Atomicorp Staff - Site Admin
- Posts: 8355
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: earth
- Contact:
Re: jgreylist
I don't know for sure, we've got a lot of other projects in the queue right now. Its on the list though (patches welcome!)
Re: jgreylist
Ok,
I've made a src.rpm of it, but all it does is install it (have to make config manually). If you want the src.rpm for qmail and jgreylist, where do I upload / send it?
I've made a src.rpm of it, but all it does is install it (have to make config manually). If you want the src.rpm for qmail and jgreylist, where do I upload / send it?
-
- Atomicorp Staff - Site Admin
- Posts: 8355
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: earth
- Contact:
Re: jgreylist
just paste a link for it, and we'll check it out. Another option might be setting up a github account, and storing your patches & specs over there.
Re: jgreylist
I used your qgreylist when I created the jgreylist src.rpm. Here it is:
http://github.com/downloads/rpms/jgreyl ... rt.src.rpm
Have added on our gamera servers, and the load was reduced bigtime
http://github.com/downloads/rpms/jgreyl ... rt.src.rpm
Have added on our gamera servers, and the load was reduced bigtime
-
- Atomicorp Staff - Site Admin
- Posts: 8355
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: earth
- Contact:
Re: jgreylist
Great work!
Re: jgreylist
Updated the src.rpm to include the source jgreylist.c (so that it can be rebuilt). I've also added the rpm which I use in production now.
http://github.com/rpms/jgreylist
http://github.com/rpms/jgreylist
-
- Long Time Forum Regular
- Posts: 2813
- Joined: Sat Aug 20, 2005 9:30 am
- Location: The Netherlands
Re: jgreylist
I see the current jgreylist package does not include jgreylist-clean (and a cronjob that runs it). Or is that somehow not needed when using the C-version of jgreylist?
Lemonbit Internet Dedicated Server Management
Re: jgreylist
It should have been included, but I forgot it when I created the src.rpm. I'll try to add it when later if Scott won't
-
- Atomicorp Staff - Site Admin
- Posts: 8355
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: earth
- Contact:
Re: jgreylist
I used your changes
Re: jgreylist
I hope someone can help here. We have Centos 5 with ASL and Pleask. Yesterday we upgraded to Plesk 10.1.1.
If people send mail using port 587, all goes OK. But if they send using port 25, an error is generated:
Many thanks in advance.
EDIT: We turned off Spamassassin and that made no difference. So we now have Spamassassin back ON and have uninstalled jgreylist and now emails are all going fine. If someone can guide as to how we can get jgreylist working again without blocking port 25 traffic, I'd be very grateful.
EDIT2: We were working to get Spamassassin working again and all looked OK, including websites working and mail coming in and out. And also did some upgrades that were listed. One of these was an upgrade to php 5.2.17 which might have caused some issues:
http://www.atomicorp.com/forums/viewtop ... sk+upgrade
http://www.atomicorp.com/forums/viewtop ... sk+upgrade
http://www.atomicorp.com/forums/viewtop ... sk+upgrade
Now we have no mail in or out. We also have very high server load and websites are not loading. Can someone please help with what is best? Can we downgrade to php 5.1 and get it all working again with Plesk 10.1.1? I'd be most grateful for some guidance from experts.
If people send mail using port 587, all goes OK. But if they send using port 25, an error is generated:
Can someone tell us where that config setting is and what we need to do to get it set and working again on port 25?Your outgoing (SMTP) e-mail server has reported an internal error. If you continue to receive this message, contact your server administrator or Internet Service provider (ISP). The server responded: jgreylist[24966]: JGREYLIST_DIR is not set
Many thanks in advance.
EDIT: We turned off Spamassassin and that made no difference. So we now have Spamassassin back ON and have uninstalled jgreylist and now emails are all going fine. If someone can guide as to how we can get jgreylist working again without blocking port 25 traffic, I'd be very grateful.
EDIT2: We were working to get Spamassassin working again and all looked OK, including websites working and mail coming in and out. And also did some upgrades that were listed. One of these was an upgrade to php 5.2.17 which might have caused some issues:
http://www.atomicorp.com/forums/viewtop ... sk+upgrade
http://www.atomicorp.com/forums/viewtop ... sk+upgrade
http://www.atomicorp.com/forums/viewtop ... sk+upgrade
Now we have no mail in or out. We also have very high server load and websites are not loading. Can someone please help with what is best? Can we downgrade to php 5.1 and get it all working again with Plesk 10.1.1? I'd be most grateful for some guidance from experts.
Re: jgreylist
(I'm only running this on gamera servers)
JGREYLIST_DIR should be set in this file: /etc/tcpcontrol/smtp.rules
it could be like this:
If you do any changes in smtp.rules you need to run this:
You should also check this file: /service/smtpd/run
see if it contins jgreylist:
JGREYLIST_DIR should be set in this file: /etc/tcpcontrol/smtp.rules
it could be like this:
Code: Select all
:allow,JGREYLIST_DIR="/var/qmail/jgreylist/",VALIDRCPTTO_CDB="/var/qmail/control/validrcptto.cdb",QMAILQUEUE="/var/qmail/bin/qmail-scanner-queue.pl",MAXLOAD="800",MAXCONNIP="2",MAXCONNC="5",DIEMSG="421 Service temporarily not avalable"
Code: Select all
tcprules /etc/tcpcontrol/smtp.cdb /etc/tcpcontrol/smtp.rules.tmp < /etc/tcpcontrol/smtp.rules
see if it contins jgreylist:
Code: Select all
fixcrio $rbl /var/qmail/bin/jgreylist qmail-smtpd