Atomicorp

Posted: **Thu Nov 11, 2010 11:37 pm**

I get this on my boxes.

Any ideas ?

A dependency problem is found: required package psa-proftpd-xinetd-1.3.2e-cos5.build95101022.10.x86_64 conflicts with psa-proftpd-1.3.3c-2.el5.art.x86_64. No upgrade or obsolete solution was found for psa-proftpd. Try to add psa-proftpd to removable list.Problem occured during searching conflicts for package psa-proftpd-xinetd-1.3.2e-cos5.build95101022.10.x86_64 Error: Unable to proceed with the installation until the package psa-proftpd-1.3.3c-2.el5.art.x86_64 is removed from the system.
Not all packages were installed.
Please resolve this issue and try installing the packages again.
If you cannot resolve the issue on your own, contact product technical support for assistance.

Posted: **Fri Nov 12, 2010 4:31 am**

you could shut down ftp port for security reasons (due to vulnerability in plesk proftpd package which was discussed here).
yum remove psa-proftpd-1.3.3c-2.el5.art.x86_64
update Plesk
yum install psa-proftpd-1.3.3c-2.el5.art.x86_64
EDIT: and than open ftp port again

I havent tried it on my own. So just an idea how to try it. Do it on your own risk

Posted: **Sun Nov 14, 2010 4:49 pm**

If you try to remove the proftpd package this happens ...

Code: Select all

Removing:
 psa-proftpd                       x86_64                       1.3.3c-2.el5.art                                   installed                       5.8 M
Removing for dependencies:
 psa                                 x86_64                       9.5.3-cos5.build95101022.10                        installed                        34 M
 psa-api-rpc                       noarch                       9.5.3-cos5.build95101022.10                        installed                       1.4 M
 psa-awstats-configurator    noarch                       1.0.0-cos5.build95101022.10                        installed                        0.0
 psa-backup-manager         x86_64                       9.5.3-cos5.build95101022.10                        installed                        12 M
 psa-libpam-plesk               x86_64                       9.5.3-cos5.build95101022.10                        installed                       155 k
 psa-locale-de-DE               noarch                       9.5.3-2010071513                                   installed                        12 M
 psa-locale-es-ES               noarch                       9.5.3-2010100116                                   installed                        12 M
 psa-migration-agents         x86_64                       9.5.3-cos5.build95101022.10                        installed                       138 k
 psa-migration-manager       x86_64                       9.5.3-cos5.build95101022.10                        installed                       969 k
 psa-rubyrails-configurator   x86_64                       1.1.6-cos5.build95101022.10                        installed                        0.0
 psa-spamassassin              x86_64                       9.5.3-cos5.build95101022.10                        installed                       176 k
 psa-updates                     noarch                       9.5.3-cos5.build95101022.10                        installed                        0.0

Its been a few days and I wonder. Hasn't anyone else had the exact same problem ? This should affect everyone as I can understand. Except if noone cares to update to the latest 9.5.3 update of plesk and all are waiting for 10.x to become stable...

Posted: **Sun Nov 14, 2010 5:33 pm**

what happens if you exclude those two packages in plesk.repo file and than try to update?
psa-proftpd-xinetd-1.3.2e-cos5.build95101022.10.x86_64
psa-proftpd-1.3.2e-cos5.build95101022.10.x86_64.rpm

I will update to Plesk 9.5.3 but I let some time pass by. There seems to be no security reason to update to Plesk 9.5.3.
Otherwise I would have updated allready. Plesk 10 is something I will try out in the middle of the next year or later.

Posted: **Tue Nov 16, 2010 7:13 am**

having the same problem on all my boxes...

In the newer base package only proftpd got updated?

http://www.parallels.com/it/products/plesk/ProFTPD/

Posted: **Thu Nov 18, 2010 4:09 pm**

This just bit me also on both boxes and i'm fully up to date. If i try and remove art proftpd version it wants to remove all of plesk. Any solution on this/

Posted: **Thu Nov 18, 2010 4:57 pm**

Good news, it looks like the latest parallels update will upgrade now. Once its complete run:

yum reinstall psa-proftpd

Posted: **Thu Nov 18, 2010 5:27 pm**

I just cleared the tmp on both boxes and rebooted then tried to update thru plesk and still getting the issue that it won't update without removing art psa-proftpd. Funny thing is i get one email that says it went thru and it's updated and the next one says it failed due to the art proftd. I tried to remove psa-proftpd 1.3.3.c and it still trys to remove all of plesk. Any solutions?

Panel Update Successful 1st Email

Code: Select all

Parallels Products Installer 3.6.0 (built on 2010-04-13 11:20 svn rev. 290858) started at (timezone EST) Thu Nov 18 16:13:28 2010 Command line arguments: /usr/local/psa/admin/bin/autoinstaller --enable-xml-output --source-type=plesk --target=/root/psa --select-release-id=PLESK_9_5_3 --notify-email=xxxxx@xxxxxxxxxxxx.com --install-component=psa-autoinstaller --no-daemon 

Try to find rcfile...
Autoinstaller rcfile not found.
Checking hostname is sucessfull.
Opsys detected as: os_vendor=CentOS os_name=Linux version=5.5 arch=x86_64 environment=~empty Final opsys (with overriding) is: os_vendor=CentOS os_name=Linux version=5.5 arch=x86_64 environment=~empty File downloading products.inf3: 100% was finished.
File downloading plesk.inf3: 10%..26%..31%..41%..50%..60%..70%..81%..90%..100% was finished.
File downloading ppsmbe.inf3: 18%..39%..61%..82%..100% was finished.
File downloading sitebuilder.inf3: 22%..48%..61%..74%..100% was finished.
File downloading setemplates.inf3: 44%..100% was finished.
File downloading pp-sitebuilder.inf3: 65%..100% was finished.
File downloading billing.inf3: 34%..73%..100% was finished.
repository: Get brief packages info for all sources Checking for installed packages... 
File downloading PSA_9.5.3/plesk-9.5.3-cos5-x86_64.inf3: 11%..24%..30%..40%..50%..60%..70%..82%..90%..100% was finished.
File downloading PSA_9.5.3/plesk-patches-9.5.3-cos5-x86_64.inf3: 100% was finished.
repository: Get brief packages info for all sources Detecting installed product components.
Component plesk/base: mode upgrade,  installed=1289336338,  available=1287745188 Checking if key update required for component plesk/base Config allows upgrade from version 9.5 without key update Currently installed component version is 9.5.3-cos5.build95101022.10 No keyupdate need for this component Component plesk/psa-autoinstaller: mode up2date,  installed=1271132654,  available=1271132654 Component plesk/postgresql: mode up2date,  installed=1286808150,  available=1286808150 Component plesk/vault: mode up2date,  installed=1287721334,  available=1287721334 Component plesk/ppwse: mode install,  installed=0,  available=1287721309 Component plesk/api: mode up2date,  installed=1287721245,  available=1287721245 Component plesk/pmm-ded: mode up2date,  installed=1287721205,  available=1287721205 Component plesk/sb-publish: mode install,  installed=0,  available=1179887889 Component plesk/sbm: mode install,  installed=0,  available=1220864885 Component plesk/cf-support: mode install,  installed=0,  available=1287721323 Component plesk/miva: mode install,  installed=0,  available=1287721326 Component plesk/billing: mode install,  installed=0,  available=1245902780 Component plesk/mod-bw: mode up2date,  installed=1194490345,  available=1194490345 Component plesk/asp: mode up2date,  installed=1261760091,  available=1223518800 Component plesk/java: mode install,  installed=0,  available=1287721250 Component plesk/mod_python: mode up2date,  installed=1168104152,  available=1168104152 Component plesk/ruby: mode up2date,  installed=1287721324,  available=1287721324 Component plesk/php5: mode up2date,  installed=1287721348,  available=1287721348 Component plesk/qmail: mode up2date,  installed=1287721343,  available=1287721343 Component plesk/postfix: mode install,  installed=0,  available=1287721343 Component plesk/psa-firewall: mode up2date,  installed=1287721249,  available=1287721249 Component plesk/psa-vpn: mode install,  installed=0,  available=1287721290 Component plesk/psa-fileserver: mode install,  installed=0,  available=1287721242 Component plesk/sshterm: mode install,  installed=0,  available=1228112978 Component plesk/watchdog: mode install,  installed=0,  available=1287721313 Component plesk/cs-gs: mode install,  installed=0,  available=1287721247 Component plesk/battlefield: mode install,  installed=0,  available=1287721302 Component plesk/bf2: mode install,  installed=0,  available=1287721322 Component plesk/mailman: mode up2date,  installed=1287721320,  available=1287721320 Component plesk/kav: mode install,  installed=0,  available=1287721330 Component plesk/drweb: mode install,  installed=0,  available=1287721225 Component plesk/spamassassin: mode up2date,  installed=1287721253,  available=1287721253 Component plesk/backup-ded: mode up2date,  installed=1287721317,  available=1287721317 Component plesk/atis: mode install,  installed=0,  available=1218704490 Component plesk/de-DE-locale: mode install,  installed=0,  available=1279175238 Component plesk/ja-JP-locale: mode install,  installed=0,  available=1279175390 Component plesk/es-ES-locale: mode install,  installed=0,  available=1285925794 Component plesk/ru-RU-locale: mode install,  installed=0,  available=1279175419 Component plesk/fr-FR-locale: mode install,  installed=0,  available=1279175331 Component plesk/it-IT-locale: mode install,  installed=0,  available=1279175362 Component plesk/zh-CN-locale: mode install,  installed=0,  available=1279175445 Component plesk/zh-TW-locale: mode install,  installed=0,  available=1279175471 Component plesk/nl-NL-locale: mode install,  installed=0,  available=1279175499 Component plesk/horde: mode up2date,  installed=1287721300,  available=1287721300 Component plesk/atmail: mode up2date,  installed=1284656979,  available=1287721220 You already have the latest version of product(s) and all selected components  installed. Installation will not continue.


---
Parallels Products Installer.

Plesk Failed to update 2nd email

Code: Select all

Parallels Products Installer 3.6.0 (built on 2010-04-13 11:20 svn rev. 290858) started at (timezone EST) Thu Nov 18 16:13:31 2010 Command line arguments: /usr/local/psa/admin/bin/autoinstaller --enable-xml-output --source-type=plesk --target=/root/psa --select-release-id=PLESK_9_5_3 --notify-email=xxxxxxxx@xxxxxxxx.com --install-component=base 

Try to find rcfile...
Autoinstaller rcfile not found.
Checking hostname is sucessfull.
Opsys detected as: os_vendor=CentOS os_name=Linux version=5.5 arch=x86_64 environment=~empty Final opsys (with overriding) is: os_vendor=CentOS os_name=Linux version=5.5 arch=x86_64 environment=~empty File downloading products.inf3: 100% was finished.
File downloading plesk.inf3: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% was finished.
File downloading ppsmbe.inf3: 18%..61%..82%..92%..100% was finished.
File downloading sitebuilder.inf3: 22%..48%..61%..74%..100% was finished.
File downloading setemplates.inf3: 44%..100% was finished.
File downloading pp-sitebuilder.inf3: 65%..100% was finished.
File downloading billing.inf3: 34%..73%..100% was finished.
repository: Get brief packages info for all sources Checking for installed packages... 
File downloading PSA_9.5.3/plesk-9.5.3-cos5-x86_64.inf3: 10%..20%..30%..41%..50%..62%..70%..80%..90%..100% was finished.
File downloading PSA_9.5.3/plesk-patches-9.5.3-cos5-x86_64.inf3: 100% was finished.
repository: Get brief packages info for all sources Detecting installed product components.
Component plesk/base: mode upgrade,  installed=1289336338,  available=1287745188 Checking if key update required for component plesk/base Config allows upgrade from version 9.5 without key update Currently installed component version is 9.5.3-cos5.build95101022.10 No keyupdate need for this component Component plesk/psa-autoinstaller: mode up2date,  installed=1271132654,  available=1271132654 Component plesk/postgresql: mode up2date,  installed=1286808150,  available=1286808150 Component plesk/vault: mode up2date,  installed=1287721334,  available=1287721334 Component plesk/ppwse: mode install,  installed=0,  available=1287721309 Component plesk/api: mode up2date,  installed=1287721245,  available=1287721245 Component plesk/pmm-ded: mode up2date,  installed=1287721205,  available=1287721205 Component plesk/sb-publish: mode install,  installed=0,  available=1179887889 Component plesk/sbm: mode install,  installed=0,  available=1220864885 Component plesk/cf-support: mode install,  installed=0,  available=1287721323 Component plesk/miva: mode install,  installed=0,  available=1287721326 Component plesk/billing: mode install,  installed=0,  available=1245902780 Component plesk/mod-bw: mode up2date,  installed=1194490345,  available=1194490345 Component plesk/asp: mode up2date,  installed=1261760091,  available=1223518800 Component plesk/java: mode install,  installed=0,  available=1287721250 Component plesk/mod_python: mode up2date,  installed=1168104152,  available=1168104152 Component plesk/ruby: mode up2date,  installed=1287721324,  available=1287721324 Component plesk/php5: mode up2date,  installed=1287721348,  available=1287721348 Component plesk/qmail: mode up2date,  installed=1287721343,  available=1287721343 Component plesk/postfix: mode install,  installed=0,  available=1287721343 Component plesk/psa-firewall: mode up2date,  installed=1287721249,  available=1287721249 Component plesk/psa-vpn: mode install,  installed=0,  available=1287721290 Component plesk/psa-fileserver: mode install,  installed=0,  available=1287721242 Component plesk/sshterm: mode install,  installed=0,  available=1228112978 Component plesk/watchdog: mode install,  installed=0,  available=1287721313 Component plesk/cs-gs: mode install,  installed=0,  available=1287721247 Component plesk/battlefield: mode install,  installed=0,  available=1287721302 Component plesk/bf2: mode install,  installed=0,  available=1287721322 Component plesk/mailman: mode up2date,  installed=1287721320,  available=1287721320 Component plesk/kav: mode install,  installed=0,  available=1287721330 Component plesk/drweb: mode install,  installed=0,  available=1287721225 Component plesk/spamassassin: mode up2date,  installed=1287721253,  available=1287721253 Component plesk/backup-ded: mode up2date,  installed=1287721317,  available=1287721317 Component plesk/atis: mode install,  installed=0,  available=1218704490 Component plesk/de-DE-locale: mode install,  installed=0,  available=1279175238 Component plesk/ja-JP-locale: mode install,  installed=0,  available=1279175390 Component plesk/es-ES-locale: mode install,  installed=0,  available=1285925794 Component plesk/ru-RU-locale: mode install,  installed=0,  available=1279175419 Component plesk/fr-FR-locale: mode install,  installed=0,  available=1279175331 Component plesk/it-IT-locale: mode install,  installed=0,  available=1279175362 Component plesk/zh-CN-locale: mode install,  installed=0,  available=1279175445 Component plesk/zh-TW-locale: mode install,  installed=0,  available=1279175471 Component plesk/nl-NL-locale: mode install,  installed=0,  available=1279175499 Component plesk/horde: mode up2date,  installed=1287721300,  available=1287721300 Component plesk/atmail: mode up2date,  installed=1284656979,  available=1287721220
KeyUpdateChecker::doCheck: no components for check key update
repository: Get full packages info for all sources Retrieving information about the installed packages... 
read cache file
File downloading PSA_9.5.3/dist-rpm-CentOS-5-x86_64/build-9.5.3-cos5-x86_64.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% was finished.
File downloading PSA_9.5.3/update-rpm-CentOS-5-x86_64/update-9.5.3-cos5-x86_64.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% was finished.
File downloading PSA_9.5.3/thirdparty-rpm-CentOS-5-x86_64/thirdparty-9.5.3-cos5-x86_64.hdr.gz: 11%..22%..31%..40%..52%..60%..72%..81%..100% was finished.
Determining the packages that need to be installed.
  skip package 'plesk-base-9.5.3-cos5.build95101022.10.x86_64' from component base - there is same or newer version of this package is installed (in system plesk-base-9.5.3-cos5.build95101022.10.x86_64)
  skip package 'plesk-skins-9.5.3-0.293097.noarch' from component base - there is same or newer version of this package is installed (in system plesk-skins-9.5.3-0.293097.noarch)
  skip package 'psa-9.5.3-cos5.build95101022.10.x86_64' from component base - there is same or newer version of this package is installed (in system psa-9.5.3-cos5.build95101022.10.x86_64)
  skip package 'psa-api-9.5.3-cos5.build95101022.10.noarch' from component base - there is same or newer version of this package is installed (in system psa-api-9.5.3-cos5.build95101022.10.noarch)
  skip package 'psa-awstats-configurator-1.0.0-cos5.build95101022.10.noarch' from component base - there is same or newer version of this package is installed (in system psa-awstats-configurator-1.0.0-cos5.build95101022.10.noarch)
  skip package 'psa-fcgi-2.4.0-2.x86_64' from component base - there is same or newer version of this package is installed (in system psa-fcgi-2.4.0-2.x86_64)
  skip package 'psa-libpam-plesk-9.5.3-cos5.build95101022.10.x86_64' from component base - there is same or newer version of this package is installed (in system psa-libpam-plesk-9.5.3-cos5.build95101022.10.x86_64)
  skip package 'psa-locale-base-en-US-9.5.3-2010071512.noarch' from component base - there is same or newer version of this package is installed (in system psa-locale-base-en-US-9.5.3-2010071512.noarch)
  skip package 'psa-logrotate-3.7-cos5.build95101022.10.x86_64' from component base - there is same or newer version of this package is installed (in system psa-logrotate-3.7-cos5.build95101022.10.x86_64)
  skip package 'psa-mod-fcgid-configurator-1.0-14.x86_64' from component base - there is same or newer version of this package is installed (in system psa-mod-fcgid-configurator-1.0-14.x86_64)
  skip package 'psa-mod_fcgid-1.10-3.x86_64' from component base - there is same or newer version of this package is installed (in system psa-mod_fcgid-1.10-3.x86_64)
  skip package 'psa-proftpd-1.3.2e-cos5.build95101022.10.x86_64' from component base - there is same or newer version of this package is installed (in system psa-proftpd-1.3.3c-2.el5.art.x86_64)
  skip package 'psa-pylibplesk-9.5.3-cos5.build95101022.10.x86_64' from component base - there is same or newer version of this package is installed (in system psa-pylibplesk-9.5.3-cos5.build95101022.10.x86_64)
  skip package 'psa-selinux-9.5.3-cos5.build95101022.10.noarch' from component base - there is same or newer version of this package is installed (in system psa-selinux-9.5.3-cos5.build95101022.10.noarch)
  skip package 'psa-updates-9.5.3-cos5.build95101022.10.noarch' from component base - there is same or newer version of this package is installed (in system psa-updates-9.5.3-cos5.build95101022.10.noarch)
Unhappy caught; try to resolve again.
A dependency problem is found: required package psa-proftpd-xinetd-1.3.2e-cos5.build95101022.10.x86_64 conflicts with psa-proftpd-1.3.3c-2.el5.art.x86_64. No upgrade or obsolete solution was found for psa-proftpd. Try to add psa-proftpd to removable list.Problem occured during searching conflicts for package psa-proftpd-xinetd-1.3.2e-cos5.build95101022.10.x86_64 Error: Unable to proceed with the installation until the package psa-proftpd-1.3.3c-2.el5.art.x86_64 is removed from the system.
Not all packages were installed.
Please resolve this issue and try installing the packages again.
If you cannot resolve the issue on your own, contact product technical support for assistance.


---
Parallels Products Installer.

Posted: **Thu Nov 18, 2010 7:41 pm**

same here on 9.5.2

Posted: **Fri Nov 19, 2010 10:50 am**

Same problem here. Adding a reply so I'm notified when a reply / fix is posted.

Posted: **Sat Nov 20, 2010 7:28 am**

Ran yum and installed the 2 proftpd builds,then Plesk updater and all is well now. Seem's to have worked itself out with the updater issue.

Posted: **Sat Nov 20, 2010 9:00 am**

Great.

Just ran yum update and an updated psa-proftpd was there that wasn't yesterday when I ran it. Installed. Then run within Plesk the update to 9.5.3 and all's well now. Installed successfully!

Thank you Atomic!

Posted: **Tue Nov 30, 2010 7:05 pm**

I think I messed up and agreed to the situation in post 3 a few weeks ago and blew away a chunk of my Plesk 9 install.

I have a working server and a broken control panel. /etc/init.d/psa is missing.

I tried to reinstall Plesk but it won't reinstall with proftpd still installed.

I tried yum remove several times and it reports successful but isn't really removing proftpd

> yum erase psa-proftpd.x86_64

================================================================================
Package Arch Version Repository Size
================================================================================
Removing:
psa-proftpd x86_64 1.3.3c-3.fc8.art installed 5.8 M

Transaction Summary
================================================================================
Install 0 Package(s)
Update 0 Package(s)
Remove 1 Package(s)

Is this ok [y/N]: y
Downloading Packages:
============================== Entering rpm code ===============================
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Erasing : psa-proftpd 1/1
userdel: user psaftp does not exist
=============================== Leaving rpm code ===============================

Removed:
psa-proftpd.x86_64 0:1.3.3c-3.fc8.art

Complete!

> yum list | grep proftp

psa-proftpd.x86_64 1.3.3c-3.fc8.art installed

I do use the atomic repo to get the latest php and related packages.

What is the best way for me to recover from this situation? Thanks!

Posted: **Tue Nov 30, 2010 7:12 pm**

Second reply to get subscribed to the thread... there isn't a menu option to do that after the fact?

Posted: **Tue Nov 30, 2010 9:23 pm**

I'm moving along again. I needed to add a psaftp user, then try to remove, and seem to be moving OK through the re-install process.

Atomicorp

psa-proftpd conflicts - plesk won't update

psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update

Re: psa-proftpd conflicts - plesk won't update